Single Chamber Orifice Differential Pressure Flow Meter
Tek-DP 1610A Single Chamber Orifice Differential Pressure Flow Meter is a single chamber device. The Tek-DP 1610A, designed for precise flow measurement in oil and gas applications, for instance. A Tek-DP 1610A has a simple plate removal technique. These fittings are suitable for liquid flow measurement as well. Tek-Trol ensures that each single chamber fitting undergoes rigorous testing. The Tek-DP 1610A meters, tested under pressure conditions, provide maximum safety to the user and the system.
The single chamber fittings are manufactured in accordance with ANSI, AGA/API, and ASTM standards. As a result, the Tek-DP 1610A is perfect for pressure tap integrity, positive plate seal, seal protrusion, and eccentricity. Install single chamber orifice fittings in vertical or horizontal lines. Tek-DP 1610A meters are available in a wide range of pipe sizes from 2″ to 48″. You can replace or inspect the Tek-DP 1610A orifice plates easily. As a result, in a depressurized flow line Tek-DP 1610A you inspect without physically removing the meter from the line. The Tek-DP 1610A Single Chamber Orifice Fittings are best used in risky conditions. One example might be replacing an orifice plate under pressure conditions, for instance. Use the Tek-DP 1610A where nominal shutdown time is acceptable, for instance. The Tek-DP 1610A plate removal procedure does not require removal of the flange bolts or spreading of flanges. As a result, this prevents potential leakage of process fluid, and safeguards the operators.